Low-cost sensor systems for testing slightly ferromagnetic materials
Sensor system P was developed for the eddy current testing of slightly ferromagnetic materials such as rods and tubes which are sufficiently homogenized with permanent magnetization. The system can be used for testing austenitic and non-ferromagnetic metals as well as slightly ferromagnetic metals in one piece or the continuous testing for surface defects. Combined with a FERROMAT channel, it is also possible to detect iron enclosures in non-ferromagnetic materials.
Your advantages at a glance
- Testing of austenitic and non-ferromagnetic as well as slightly ferromagnetic metals with sufficient magnetization
- Test material diameter from 1 - 40 mm
- Test coil and protective nozzle sizes increase in small increments for optimum test results
- For testing with encircling coils, segment coils, and DEFECTOARRAY sensors
Technical Data
| Defect types by defect detectability DIN EN ISO 15549: | Transverse and point defects |
| Test material diameter: | 1 mm - 40 mm |
| Iron enclosure detection: | Combined with FERROMAT channel with DEFECTOMAT DA, DEFECTOMAT DI/CI |
