Practical solution for including external defects
To ensure compliance with high quality standards, international standards such as EN 10246 specify artificial test defects. FOERSTER provides a precision test defect saw for including standardized and reproducible defect depths for artificial longitudinal and transverse defects. The small increments of the twist clamping sets ensure optimal clamping of the test materials and zero point setting (saw blade touches the test material). This ensures great accuracy of 10 µm when cutting.
Your advantages at a glance
- Inclusion of external defects in metallic wires, tubes, and rods with diameters of 1 mm - 20 mm
- Just one clamping process to position items for sawing longitudinal and transverse defects
- Innovative twist clamping set concept
- Depth cutting accuracy of 10 µm
Technical Data
| Test material: | Metallic wires, tubes, and rods |
| Range of diameters: | 1 – 20 mm |
| Motor speed: | 200 rpm with HSS switch position, 600 rpm with HM switch position |
| Saw blade strengths (groove width): | 0.08 – 0.1 – 0.2 – 0.3 mm |
| Maximum groove length: | 25 mm |
| Longitudinal cut accuracy: | 100 μm |
| Depth cutting accuracy: | 10 μm |
| Saw blade material: | HSS – HM |